Home Automation Como

For Como character homes we lean on Lutron Caseta and Aqara wireless where rewiring behind heritage plaster isn't sensible, and hardwired Crestron or C-Bus where the renovation is deep enough to run new cable. The choice is driven by the building, not brand preference.

post-war and inter-war character with pockets of newer infill - which shapes what's practical. Our office on Stirling Highway in Nedlands means a site visit to Como is short, and the same engineers who quote the job program and commission it.

• 01Wireless-first design that respects heritage plasterwork

Como (6152) is Como, a quiet riverside suburb between South Perth and Canning Bridge. Recognisable streets include Preston Street, Canning Highway, Thelma Street and Douglas Avenue, with the area anchored by the South Perth foreshore and Wesley College.

Housing stock is post-war and inter-war character with pockets of newer infill. On the power side: single-phase dominant, three-phase for premium rebuilds. Networks and cabling: FTTN/FTTP mix; Wi-Fi through solid-brick homes usually needs at least one extra access point. These are the constraints every home automation job in Como has to design around.

• 01Free on-site consultation across Como and surrounds
• 02Fixed written quote - the price you sign is the price you pay
• 03Licensed electricians and data-cabling technicians on every job
• 0410-year workmanship warranty on all installs

We treat Home as an engineered install, not a retail box shift - proper Cat6 or Cat6A cabling, weatherproof enclosures where hardware sits outside, tidy switchboard labelling, and a documented as-built handover pack you can hand to the next electrician.

Pricing for Home is transparent and honest. We publish typical ranges, walk you through hardware options in plain English, and never bolt on monthly cloud subscriptions or vendor lock-ins after the fact.

Because we live and work in Perth, response times on home enquiries are fast: most site visits happen within the same week and post-install adjustments are handled by the same crew who did the original work.

Home isn't a commodity - camera angles that respect neighbour privacy, lock strikes that sit flush, touchscreens at the right height, sub-mains that don't nuisance-trip. That craft is what separates a good install from an average one.

Choosing SmartSpace for Home means dealing with the same two founders - Leo and James, from first call through to handover. No account managers, no offshore call centres, no scripted upsells.

Every home project starts with a proper on-site consultation. We measure, mark cable runs, photograph switchboards and talk through how the household actually uses the space, so the home quote we hand you is fixed in writing before a tool is lifted.

We're picky about the brands we specify. Every product on our shelf has been used in the field long enough for us to know its real failure modes, its firmware quirks, and its long-term serviceability. If a cheaper option is honestly the better fit for your brief, we'll say so and quote it.

Aftercare is where most installers fall down and where we've built our reputation. Direct-line phone support from the crew who did the work, remote diagnostics on supported systems, and a fast-lane callout schedule for existing clients. The relationship doesn't end at handover.

Quoting is done on site, not over the phone. We look at the switchboard, the ceiling space, the wall construction and the existing cabling before we put a number on paper, because that's the only way a fixed price stays fixed. If we find something during the works that genuinely changes the scope, you hear about it the same day, in writing, before we proceed.

• 01Free on-site consultation and fixed written quote for Home
• 02Licensed electricians on every home job - no sub-contractors
• 0310-year workmanship warranty on all home installs
• 04No monthly subscriptions, no vendor lock-in
• 05Same-week home bookings across the Perth metro

Our systems are built to be handed over, not held hostage. You own the licences, you hold the admin credentials, and nothing we install depends on a portal only we can log into. Plenty of homeowners come to us after being locked out of their own gear by a previous installer, and we won't put anyone in that position.

Timelines are set by the trade sequence, not by wishful thinking. On new builds and renovations we work back from lock-up and plaster dates so cabling lands before the walls close, and we coordinate directly with your builder, sparky and cabinet maker rather than leaving you to relay messages.

Cabling is the part nobody sees and the part that decides how long a system lasts. We run generous spare capacity, terminate to standard, label both ends, and test every run before it's signed off. It costs a little more on day one and it saves rewiring the house when the next generation of hardware arrives.

We build for the way the household actually lives. Kids who lock themselves out, a partner who won't touch an app, grandparents who need a physical button, a dog that sets off badly placed sensors - those details decide whether a system gets used or switched off after a fortnight, so we ask about them up front.

Security and privacy are treated as defaults, not extras. Cameras get their own network segment, default passwords are always changed, remote access is locked down, and firmware is checked at handover. If a device only works by exposing your home network to the open internet, we won't specify it.

Perth's climate shapes what we specify. Salt air west of the freeway corrodes cheap outdoor hardware within a couple of summers, roof spaces hit brutal temperatures in February, and afternoon sun destroys plastics on a north-west elevation. We choose enclosures, cable and mounting hardware that survive those conditions rather than the ones that look identical on a spec sheet.

Double-brick construction is the norm here and it changes almost every decision. There's no wall cavity to chase in a solid internal wall, wireless signal drops sharply through render, and core-drilling is a different job to cutting a stud wall. Anyone quoting your house sight-unseen on eastern-states assumptions will find that out halfway through the install.

We work alongside your other trades rather than around them. On a build or a renovation that means agreeing cable routes with the electrician before rough-in, keeping ceiling positions clear of ducting with the HVAC installer, and confirming joinery cut-outs with the cabinet maker. Most on-site problems are coordination failures, not technical ones.