EV Charger Installation Perth - Home Vehicle Charging Station

An EV charger is a high-current appliance that runs for hours every day - it has to be installed properly. We're licensed WA electricians and accredited installers for Tesla Wall Connector, Fronius Wattpilot, Wallbox, Zappi and Ocular. Every install is permitted, inspected, and load-managed against your switchboard so you don't trip the main during cooking-and-charging hour.

We pair chargers with home automation and solar where it makes sense - schedule charging for solar-export hours, throttle when the oven is on, or run two cars off one 32A circuit using dynamic load sharing.

• 01Tesla, Fronius, Zappi, Wallbox, Ocular - accredited installer
• 02Single-phase 7kW and three-phase 22kW options
• 03Solar-aware charging - use your own excess
• 04Compliant switchboard upgrade if required

Most single-car Perth homes need a 7kW Type 2 wall charger on a dedicated 32A circuit, a small switchboard tidy-up, and a 20-30 metre cable run from board to garage. Installed cost typically lands between $1,800 and $3,500 depending on the brand and run length.

We handle the Western Power notification, deliver an electrical certificate of compliance, and commission the app and load-management settings on the day. If you're chasing the Synergy EV plan or a future battery, we'll wire for it now and save the retrofit cost later.

A Zappi or Wallbox Pulsar charger paired with a CT clamp on your solar inverter will only draw the power your panels are exporting - so the EV fills from sunshine, not the grid. On a 10kW Perth solar array, that's typically 30–50kWh of free charging on a sunny day, worth around $15 of fuel-equivalent driving.

We size and install solar-diverting chargers as a default on every solar-equipped home. The premium over a basic 32A AC unit is recovered within 18–24 months of ownership.

Most Perth homes are single-phase 63A, which comfortably supports a 7kW (32A) charger - about 40km of range per hour. Three-phase homes can run 22kW chargers (120km/hour) where the EV supports it. We always inspect the switchboard before quoting because older boards may need a Western Power upgrade before a 32A circuit is installed.

Most of our weekly work is in the western suburbs - Nedlands, Cottesloe, Dalkeith, Mosman Park, Peppermint Grove, Subiaco, Claremont, Floreat, City Beach, and along the river through South Perth, Applecross, Como, Mount Pleasant, Attadale, Bicton. We also cover the wider Perth metro from Joondalup to Mandurah for new builds, renovations and commercial projects.

Local installers, local phone support, local site visits. No interstate call centres.

Every ev project starts with a proper on-site consultation. We measure, mark cable runs, photograph switchboards and talk through how the household actually uses the space, so the ev quote we hand you is fixed in writing before a tool is lifted.

Our senior crew is what makes the difference on a ev install. Licensed electricians and data-cabling technicians work in our own vans, never sub-contracted out, which is why every job carries a full 10-year workmanship warranty.

We treat EV as an engineered install, not a retail box shift - proper Cat6 or Cat6A cabling, weatherproof enclosures where hardware sits outside, tidy switchboard labelling, and a documented as-built handover pack you can hand to the next electrician.

Pricing for EV is transparent and honest. We publish typical ranges, walk you through hardware options in plain English, and never bolt on monthly cloud subscriptions or vendor lock-ins after the fact.

Because we live and work in Perth, response times on ev enquiries are fast: most site visits happen within the same week and post-install adjustments are handled by the same crew who did the original work.

• 01Free on-site consultation and fixed written quote for EV
• 02Licensed electricians on every ev job - no sub-contractors
• 0310-year workmanship warranty on all ev installs
• 04No monthly subscriptions, no vendor lock-in
• 05Same-week ev bookings across the Perth metro

Every job is scheduled around your household. We start when we say we'll start, we tidy up before we leave, and we don't book more work into a day than the crew can properly finish. The result is fewer variations, cleaner finishes, and less disruption to family life.

Our workshop is in Nedlands on Stirling Highway, which keeps site visits across the metro fast and keeps our warranty response tight. When something needs adjusting - a new phone paired, a scene re-tuned, a device swapped, the same crew who did the original work is the one who drives back out.

We invest heavily in training. Every technician on the team holds the manufacturer certifications for the platforms they install, and we keep our tooling - thermal cameras, cable certifiers, calibrated meters, torque drivers, at commercial-fit-out standard. That's why our first-time-right rate sits above the industry norm.

Documentation matters. Every install ships with an as-built pack: cable schedule, device inventory with serial numbers, network map, credentials in a sealed envelope, and warranty paperwork. If ownership of the house ever changes, everything the next owner or their electrician needs is already in one folder.

We're picky about the brands we specify. Every product on our shelf has been used in the field long enough for us to know its real failure modes, its firmware quirks, and its long-term serviceability. If a cheaper option is honestly the better fit for your brief, we'll say so and quote it.