Security Sensor Lights in Nedlands, Perth - installed by SmartSpace Installations

Security Lighting · Nedlands

Security Sensor Lights Nedlands

Local security sensor lights for Nedlands (6009).

Overview

Security sensor light installation in Nedlands (6009) - motion-triggered LED floodlights, integrated with CCTV and home security, installed by licensed electricians.

We install security sensor lights across leafy riverside Nedlands, between UWA and Stirling Highway most weeks. Typical Nedlands job: 4-6 motion-activated LED floodlights covering driveway, side gates and rear yard approaches, tied into the home's alarm and CCTV so a triggered light pushes a notification to your phone.

Every install includes proper lux calculations for the site, neighbour-glare-respecting angles, dusk-to-dawn override, and separate manual switching. LED heads carry 5-year warranties and are rated for coastal Perth conditions.

Where the home already has CCTV, we integrate the sensor lights with camera events - a person detected on the driveway camera turns the floodlight on before they reach the door.

12+

Years working in Nedlands & western suburbs

500+

Homes wired across Perth

10yr

Workmanship warranty

5★

Google rating

01 · Detail

Security Sensor Lights in Nedlands - Coverage + Environment

Deeper Nedlands blocks need proper lux planning - a single flood at the front door is not enough. We typically design 4-6 heads covering driveway, side access and rear yard approaches, each with independent PIR and separate manual override.

Where the home already has CCTV we integrate the sensor lights with camera events - a person detected on the driveway camera triggers the light before they reach the door, and both events appear together in the security log.

  • 014-6 head coverage on deeper Nedlands blocks
  • 02Fittings sized and finished to sit sympathetically on heritage facades
  • 03Dusk-to-dawn override and separate manual switching

02 · Detail

About Nedlands - Local Context That Shapes The Install

Nedlands (6009) is leafy riverside Nedlands, between UWA and Stirling Highway. Recognisable streets include Stirling Highway, Broadway, Bruce Street and Waratah Avenue, with the area anchored by UWA and the Swan River foreshore.

Housing stock is 1930s–1960s brick-and-tile with heavy 2010s knock-down-rebuild activity. On the power side: mostly single-phase overhead, three-phase common on newer builds south of Broadway. Networks and cabling: NBN FTTN through most of the older grid, FTTP on rebuilds - Cat6A pre-wire is standard on new work. These are the constraints every security sensor lights job in Nedlands has to design around.

  • 01Free on-site consultation across Nedlands and surrounds
  • 02Fixed written quote - the price you sign is the price you pay
  • 03Licensed electricians and data-cabling technicians on every job
  • 0410-year workmanship warranty on all installs

03 · Detail

Security - the detail behind the quote

Our senior crew is what makes the difference on a security install. Licensed electricians and data-cabling technicians work in our own vans, never sub-contracted out, which is why every job carries a full 10-year workmanship warranty.

We treat Security as an engineered install, not a retail box shift - proper Cat6 or Cat6A cabling, weatherproof enclosures where hardware sits outside, tidy switchboard labelling, and a documented as-built handover pack you can hand to the next electrician.

Pricing for Security is transparent and honest. We publish typical ranges, walk you through hardware options in plain English, and never bolt on monthly cloud subscriptions or vendor lock-ins after the fact.

Because we live and work in Perth, response times on security enquiries are fast: most site visits happen within the same week and post-install adjustments are handled by the same crew who did the original work.

Security isn't a commodity - camera angles that respect neighbour privacy, lock strikes that sit flush, touchscreens at the right height, sub-mains that don't nuisance-trip. That craft is what separates a good install from an average one.

Choosing SmartSpace for Security means dealing with the same two founders - Leo and James, from first call through to handover. No account managers, no offshore call centres, no scripted upsells.

Access and site conditions get assessed before we price, not after. Roof pitch, insulation depth, crawl space, meter box location, existing circuit capacity and whether the switchboard has room for another module all change the labour. Quotes that ignore those things get revised upward; ours don't.

We keep a stocked van and common spares on the shelf, which is why a failed device is usually a same-week swap rather than a month waiting on a supplier. For hardware still in warranty we handle the manufacturer claim ourselves instead of handing you a support email address.

Future-proofing here means leaving room, not buying the newest thing. Spare ceiling positions capped and cabled, spare ways in the board, spare ports on the switch, and conduit where a future run will be needed. It costs almost nothing during the works and saves opening walls in five years.

  • 01Free on-site consultation and fixed written quote for Security
  • 02Licensed electricians on every security job - no sub-contractors
  • 0310-year workmanship warranty on all security installs
  • 04No monthly subscriptions, no vendor lock-in
  • 05Same-week security bookings across the Perth metro

04 · Detail

The standard we hold on every security job

Every job is scheduled around your household. We start when we say we'll start, we tidy up before we leave, and we don't book more work into a day than the crew can properly finish. The result is fewer variations, cleaner finishes, and less disruption to family life.

Our workshop is in Nedlands on Stirling Highway, which keeps site visits across the metro fast and keeps our warranty response tight. When something needs adjusting - a new phone paired, a scene re-tuned, a device swapped, the same crew who did the original work is the one who drives back out.

We invest heavily in training. Every technician on the team holds the manufacturer certifications for the platforms they install, and we keep our tooling - thermal cameras, cable certifiers, calibrated meters, torque drivers, at commercial-fit-out standard. That's why our first-time-right rate sits above the industry norm.

Documentation matters. Every install ships with an as-built pack: cable schedule, device inventory with serial numbers, network map, credentials in a sealed envelope, and warranty paperwork. If ownership of the house ever changes, everything the next owner or their electrician needs is already in one folder.

We're picky about the brands we specify. Every product on our shelf has been used in the field long enough for us to know its real failure modes, its firmware quirks, and its long-term serviceability. If a cheaper option is honestly the better fit for your brief, we'll say so and quote it.

Aftercare is where most installers fall down and where we've built our reputation. Direct-line phone support from the crew who did the work, remote diagnostics on supported systems, and a fast-lane callout schedule for existing clients. The relationship doesn't end at handover.

Quoting is done on site, not over the phone. We look at the switchboard, the ceiling space, the wall construction and the existing cabling before we put a number on paper, because that's the only way a fixed price stays fixed. If we find something during the works that genuinely changes the scope, you hear about it the same day, in writing, before we proceed.

Our systems are built to be handed over, not held hostage. You own the licences, you hold the admin credentials, and nothing we install depends on a portal only we can log into. Plenty of homeowners come to us after being locked out of their own gear by a previous installer, and we won't put anyone in that position.

FAQs

Frequently asked.

Quick answers to what Perth clients ask most. Anything we haven't covered? Get in touch.

How much does security light installation cost in Nedlands?

Supplied and installed, a 4-light sensor floodlight package for a Nedlands home is $1,400-$2,600. Integration with existing CCTV or alarm is included.

Can you integrate sensor lights with my Nedlands CCTV?

Yes - we tie sensor lights into UniFi Protect, Reolink, Hikvision and Dahua systems so a camera event triggers the light before a person reaches the door.

Brands We Specify

PhilipsHPMClipsalSonoff

Next Steps

Talk to a senior engineer.

We'll meet you on site, listen to the brief, and quote a system designed for the way you actually live.

Book a consultation

Why Smart Space

Engineered to disappear.

Twelve years on Perth jobs, 500+ homes wired, and a 10-year workmanship warranty on every install. One small team - engineers, not generalists.

Call