Tesla Wall Connector Installation Perth by SmartSpace Installations - Perth, WA

EV · Perth

Tesla Wall Connector Installation Perth

Authorised Tesla install, properly load-balanced.

Overview

Tesla Wall Connector installation across Perth - Gen 3 hardware, properly load-balanced with your switchboard and integrated with solar export.

The Tesla Wall Connector is the best charger for any Tesla and works with every other EV via the included J1772 adapter. We install the Gen 3 unit on single-phase (up to 7.4kW) and three-phase (up to 22kW) supplies across Perth.

Every install includes proper load balancing with your switchboard - so the house doesn't trip when the dryer, oven and car charger run together. Solar-prioritised charging is set up where you have a compatible inverter (Fronius, SolarEdge, Tesla Powerwall).

Typical install: $1,200–$1,800 single-phase, $2,200–$3,200 three-phase, supplied and installed by a licensed Perth electrician.

7.4kW

single-phase max

22kW

three-phase max

Gen 3

current hardware

J1772

adapter included

01 · Detail

Load balancing matters more than the charger brand

A 7.4kW charger on a single-phase 80A supply can trip the main breaker the first time you run the dryer, oven and car together. Every Tesla Wall Connector install we deliver includes a switchboard load assessment and either: (a) a CT clamp on the main feed that dynamically throttles the charger when household load is high, or (b) a Tesla Gateway that pairs the charger with Powerwall to use solar export first, grid second.

Without this, the charger 'works' but causes intermittent trips, frustrated drivers and eventually a callout to add load management after the fact - at twice the cost of doing it once on install day.

02 · Detail

Tesla - what you actually get

Choosing SmartSpace for Tesla means dealing with the same two founders - Leo and James, from first call through to handover. No account managers, no offshore call centres, no scripted upsells.

Every tesla project starts with a proper on-site consultation. We measure, mark cable runs, photograph switchboards and talk through how the household actually uses the space, so the tesla quote we hand you is fixed in writing before a tool is lifted.

We work alongside your other trades rather than around them. On a build or a renovation that means agreeing cable routes with the electrician before rough-in, keeping ceiling positions clear of ducting with the HVAC installer, and confirming joinery cut-outs with the cabinet maker. Most on-site problems are coordination failures, not technical ones.

Handover is a scheduled appointment, not a set of keys at the door. We sit down with whoever will actually use the system, walk through daily operation, set up the apps on the household's phones, and adjust anything that isn't sitting right. Then we leave written instructions in plain English.

Every quote separates hardware from labour so you can see exactly where the money goes. If a cheaper device would do the job just as well for your brief, that option is on the quote too. We'd rather lose margin on a line item than have you find out later there was a sensible alternative nobody mentioned.

  • 01Free on-site consultation and fixed written quote for Tesla
  • 02Licensed electricians on every tesla job - no sub-contractors
  • 0310-year workmanship warranty on all tesla installs
  • 04No monthly subscriptions, no vendor lock-in
  • 05Same-week tesla bookings across the Perth metro

03 · Detail

Why Perth homeowners choose SmartSpace for Tesla

Access and site conditions get assessed before we price, not after. Roof pitch, insulation depth, crawl space, meter box location, existing circuit capacity and whether the switchboard has room for another module all change the labour. Quotes that ignore those things get revised upward; ours don't.

We keep a stocked van and common spares on the shelf, which is why a failed device is usually a same-week swap rather than a month waiting on a supplier. For hardware still in warranty we handle the manufacturer claim ourselves instead of handing you a support email address.

Future-proofing here means leaving room, not buying the newest thing. Spare ceiling positions capped and cabled, spare ways in the board, spare ports on the switch, and conduit where a future run will be needed. It costs almost nothing during the works and saves opening walls in five years.

Every job is scheduled around your household. We start when we say we'll start, we tidy up before we leave, and we don't book more work into a day than the crew can properly finish. The result is fewer variations, cleaner finishes, and less disruption to family life.

FAQs

Frequently asked.

Quick answers to what Perth clients ask most. Anything we haven't covered? Get in touch.

Do I need a three-phase Tesla Wall Connector?

Only if you have three-phase mains and a car that accepts 22kW AC (Tesla Model S/X). Model 3 and Y top out at 11kW AC even on a three-phase charger, so single-phase 7.4kW is usually enough.

How long does a Tesla Wall Connector install take in Perth?

Single-phase: 3–4 hours, typically $1,200–$1,800 all-in. Three-phase: half to full day, $2,200–$3,200 if existing three-phase, more if mains upgrade required.

Will it charge non-Tesla EVs?

Yes - every Gen 3 Wall Connector ships with a J1772 adapter that handles every non-Tesla EV sold in Australia.

Brands We Specify

Tesla

Next Steps

Talk to a senior engineer.

We'll meet you on site, listen to the brief, and quote a system designed for the way you actually live.

Book a consultation

Why Smart Space

Engineered to disappear.

Twelve years on Perth jobs, 500+ homes wired, and a 10-year workmanship warranty on every install. One small team - engineers, not generalists.

Call